Pytorch报错：CUDA error: device-side assert triggered_operator(): block: [0,0,0], thread: [0,0,0] assert

作者：繁依Fanyi0 | 2024-03-18 14:19:46

踩

operator(): block: [0,0,0], thread: [0,0,0] assertion `input_val >= zero &&

总是遇到如下的报错，之前一直也没有记录解决的过程，今天记录一下，避免以后再踩坑

pytorch/aten/src/ATen/native/cuda/Loss.cu:106: operator(): block: [0,0,0], thread: [0,0,0] Assertion `input_val >= zero && input_val <= one` failed.
/pytorch/aten/src/ATen/native/cuda/Loss.cu:106: operator(): block: [0,0,0], thread: [1,0,0] Assertion `input_val >= zero && input_val <= one` failed.
/pytorch/aten/src/ATen/native/cuda/Loss.cu:106: operator(): block: [0,0,0], thread: [2,0,0] Assertion `input_val >= zero && input_val <= one` failed.
/pytorch/aten/src/ATen/native/cuda/Loss.cu:106: operator(): block: [0,0,0], thread: [3,0,0] Assertion `input_val >= zero && input_val <= one` failed.
/pytorch/aten/src/ATen/native/cuda/Loss.cu:106: operator(): block: [0,0,0], thread: [4,0,0] Assertion `input_val >= zero && input_val <= one` failed.
/pytorch/aten/src/ATe1
2
3
4
5

声明：本文内容由网友自发贡献，不代表【wpsshop博客】立场，版权归原作者所有，本站不承担相应法律责任。如您发现有侵权的内容，请联系我们。转载请注明出处：https://www.wpsshop.cn/w/繁依Fanyi0/article/detail/263662